manualshive.com logo in svg

Honeywell MAXPRO NVR Hybrid PE, Hardware Installation And Configuration Manual

Share
Download
Honeywell MAXPRO NVR Hybrid PE Hardware Installation And Configuration Manual Download Page 222

M A X P R O   N V R   W E B   C L I E N T

222

 MAXPRO NVR 5.0 Installation and Configuration Guide

9

7.

Click the 

Server Configuration 

tab

. 

The 

Server Configuration

 screen (

Figure 9-2

) 

appears.

Figure 9-2    MAXPROWebConfigurator-Server Configuration

Note:

By default the Web Server and the MAXPRO Server is installed on the NVR server
machine and the IPs are set by default to local IP or computer/machine name. If it
is not set by default in your system then it is recommended to change these
settings to NVR Server (local) computer/machine name. For Honeywell supplied
NVR boxes, default computer/machine name is MAXPRO-NVR and can be
updated in the configuration from the tool.

8.

Under 

Server Configuration

:

•

Web Server IP

: If the MAXPRO NVR server computer/machine name or IP (as 

applicable) is changed then you should change the Web Server IP. Type the new 
computer/machine name or IP (as applicable) in this box and then click 

Update

.

•

MAXPRO Server IP

: If the MAXPRO NVR server computer/machine name or IP (as 

applicable) is changed then you should change the MAXPRO Server IP. Type the 
new computer/machine name or IP (as applicable) in this box and then click 

Update

. 

Both Web Server IP and MAXPRO Server IP should be same.

•

Server Public IP

: If you want to host the MAXPRO Web client via internet (or Public) 

then you need to provide the Public Server IP.Type the new Public IP (as applicable) 
in this box and then click 

Update

.

Summary of Contents for MAXPRO NVR Hybrid PE









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands