Honeywell Maxon CMA11 Instruction Manual Download Page 1 | Manualshive

Page: 1 / 12

Honeywell Maxon CMA11 Instruction Manual Download Page 1

INSTRUCTION MANUAL

32M-95001-04

Gas Electro-Mechanical Valves

MANUFACTURER AND IMPORTER ADDRESSES

Below are the addresses and contact information for the Honeywell – Maxon manufacturing location and European sales office. The
European sales office serves as the importer and EU manufacturer's representative under the EU New Legislative Framework (NLF).

MUNCIE, INDIANA, USA – MANUFACTURER

201 East 18th Street
P.O. Box 2068
Muncie, IN 47307-0068

Tel: 765.284.3304

Fax: 765.286.8394

EUROPEAN SALES OFFICE –
IMPORTER

BELGIUM
Maxon International BVBA
Luchthavenlaan 16-18
1800 Vilvoorde, Belgium

Tel: 32.2.255.09.09

Fax: 32.2.251.82.41

Please read the operating and mounting instructions before using the equipment. Install the

equipment in compliance with the prevailing regulations.

Bedrijfs- en montagehandleiding voor gebruik goed lezen! Apparaat moet volgens de geldende

voorschriften worden geïnstalleerd.

Lire les instructions de montage et de service avant utilisation! L’appareil doit imperativement

être installé selon les règlementations en vigueur.

Betriebs- und Montageanleitung vor Gebrauch lesen! Gerät muß nach den geltenden

Vorschriften installiert werden.

1
2
3
...
»

Summary of Contents for Maxon CMA11













Reviews:

No comments