Honeywell Lyric, User Reference Manual, Page: 14 / 84

14
Arm Away
Security > Arm Away
By default, this mode’s exit delay countdown is accompanied by a beeping sound.
1. Enter a user code or press Quick Arm. (If desired, click Silent Exit first.)
2. The system beeps twice and announces “Armed Away; exit now”. The exit delay
countdown begins.
Press Restart Timer if you need more time to leave.
3. Leave the premises and close the door before the countdown ends.
4. The system arms in Away mode. (Door and window sensors and interior motion
sensors are active.)
Arm Stay
Security > Arm Stay
By default, this mode’s exit delay countdown is silent.
1. Enter a user code or press Quick Arm.
2. The system beeps three times and announces “Armed Stay; exit now”. The exit delay
countdown begins.
Press Restart Timer if you need more time to leave.
3. The system arms in Stay mode. Door and window sensors are active, but interior
motion sensors are not active.
Arm Custom
Security > Arm Custom
Use this option to pre-set zones for bypass when arming the system. You can also enable or
disable the entry delay.
1. Select Arm Custom to display a list of zones.
2. Select the zones you wish to bypass when arming the system.
3. Select Arm Custom on the bottom, right side of the zone list screen.
4. Press the Entry Delay button to set the Entry Delay On or Off: Entry Delay On (the
button is blue), Entry Delay Off (the button is white). For Instant Mode, set the Entry
Delay Off. See Instant Mode below for more details.)
5. Arm the system by entering a user code.
6. The exit delay countdown begins.
7. Leave the premises and close the door the same as you would when setting Away
mode.
Bypassed zones are left unprotected.
NOTE that the next time Arm Custom is used, the same zones that were previously
selected are highlighted on the zone list screen. If desired, select different zones for
custom arming.
Instant Mode
Security >Entry Delay Off OR Security > Arm Custom > de-select Entry Delay
In Instant mode, an alarm occurs immediately when a protected Entry/Exit zone door is
opened. There is no entry delay time.
When arming in Away, Stay or Night (if enabled) modes, press Entry Delay On/Off at the
bottom of the Security screen to toggle the option Off for Instant mode.
When using
Arm Custom , de-select the Entry Delay button located in the Arm Custom menu
for Instant mode.