manualshive.com logo in svg

Honeywell Lyric, User Reference Manual, Page: 74 / 84

Share
Download
Honeywell Lyric User Reference Manual Download Page 74

 

74 

IMPORTANT NOTE ABOUT EXTERNAL ANTENNAS

 

If an external cellular radio antenna is used, the antenna may be installed or replaced ONLY 

by a professional installer. 

TO THE INSTALLER  

Lyric™-3G, Lyric-3GC 
The external antenna must not exceed a maximum directional gain (including cable loss) of 

6.0 dBi at 850 MHz and 2.5 dBi at 1900 MHz. Under no conditions may an antenna gain be 

used that would exceed the ERP and EIRP power limits as specified in FCC Parts 22H and 

24E and 27, and IC RSS-130, RSS-132, RSS-133, and RSS-139. 
 
Lyric-CDMA 
The external antenna must not exceed a maximum directional gain (including cable loss) of 

9.3 dBi at 850 MHz and 8.2 dBi at 1900 MHz. Under no conditions may an antenna gain be 

used that would exceed the ERP and EIRP power limits as specified in FCC Parts 22H and 

24E and 27. 
 
LYRICLTE-A, LYRICLTE-C 
This device is to be used in mobile or fixed applications only. For mobile and fixed 

operating configurations the antenna gain, including cable loss, must not exceed 3.25 dBi 

(US) or 0.6dBi (Canada) at 850 MHz, 5.5 dBi at 1700 MHz, 2.5dBi at 1900 MHz for satisfying 

RF exposure compliance. Under no conditions may an antenna gain be used that would 

exceed the ERP and EIRP power limits as specified in Part 22H and 24E and 27, and IC RSS-

130, RSS-132, RSS-133, and RSS-139. 
 
LYRICLTE-V 
This device is to be used in mobile or fixed applications only. For mobile and fixed 

operating configurations the antenna gain, including cable loss, must not exceed 7.31 dBi at 

780 MHz, 7.35 dBi at 1700 MHz for satisfying RF exposure compliance. Under no conditions 

may an antenna gain be used that would exceed the ERP and EIRP power limits as 

specified in Part 22H and 24E and 27. 

 

 

 

Summary of Contents for Lyric





















































































Reviews:

No comments