6
Fan operation settings
1 Press the
Fan
button to cycle to the next
available Fan mode.
2 Cycle through the modes until the required
Fan mode is displayed and leave it to
activate.
NOTE:
Available Fan modes vary with system
settings.
Fan
modes:
‒
Auto:
Fan runs only when the heating or
cooling system is on.
‒
On:
Fan is always on.
‒
Circ:
Fan runs randomly about 33% of
the time.
Thermostat mounting
1. Push excess wire back into the wall
opening.
2. Close the UWP door. It should remain
closed without bulging.
3. Align the UWP with the thermostat, and
push gently until the thermostat snaps in
place.
4. Turn the power on at the breaker box or
switch.
System operation settings
1 Press the
Mode
button to cycle to the next
available System mode.
2 Cycle through the modes until the required
System mode is displayed and leave it to
activate.
NOTE:
Available System modes vary by model
and system settings.
System
modes:
‒
Auto
‒
Heat
‒
Cool
‒
Em Heat
‒
Off