manualshive.com logo in svg

Honeywell KT73, Installation Manual, Page: 14 / 94

Share
Download
Honeywell KT73 Installation Manual Download Page 14

BENDIX/KING

KT 73

Rev 0, October/2002

10563I00.JA

Page 1-6

1.4

UNITS AND ACCESSORIES SUPPLIED

1.4.1

CONFIGURATIONS AVAILABLE 

P/N 066-01164-0101 is the only version of the KT 73 that is currently available.  Included with the 
KT 73 is the mounting rack and the configuration module.  The configuration module is optional 
but is strongly suggested.  With the module, the installation unique configuration is maintained if 
a different KT 73 is swapped into the aircraft.

1.4.2

KT 73 INSTALLATION KIT

The KT 73 Transponder installation kit P/N 050-03451-0000 contains the following parts:

050-03451-0000 INSTALL KIT KT 73  Rev. B
---------------------------------------------------------------
SYMBOL    PART NUMBER    FIND NO DESCRIPTION         UM  -0000
---------------------------------------------------------------
          030-00101-0002         PANEL MOUNT PLUG    EA   1.00
          030-01094-0002         CONNECTOR 12/24 P   EA   1.00
          030-01096-0000         KEY POLARIZER       EA   1.00
          030-01107-0024         CONNECTOR TERM 24T  EA   1.00
          030-01407-0000         CONTACT FEMALE      EA   7.00
          030-03454-0002         CONN, RECT, RECPT,  EA   1.00
          057-05944-0024         KT 73 INSTALL KIT   EA   1.00
          089-02013-0037         NUT FLAT 6-32       EA   3.00
          089-02147-0022         NUT LOCK 6-32       EA   2.00
          089-02353-0001         NUT CLIP 6-32       EA   6.00
          089-05903-0007         SCR PHP 4-40X7/16   EA   2.00
          089-05907-0006         SCR PHP 6-32X3/8    EA   1.00
          089-06012-0008         SCR FHP 6-32X1/2    EA   6.00
          089-08016-0037         WSHR INTL LK #6     EA   2.00
          089-08027-0030         WSHR FLT STD #6     EA   1.00
          089-08094-0030         WSHR FLT STD .446   EA   1.00
          089-08110-0034         WSHR SPLT LK #6     EA   1.00
          089-08168-0002         WASHER WAVE         EA   1.00
          090-00019-0007         RING RTNR .438      EA   1.00
          091-00031-0005         NY CA CLAMP .312    EA   1.00
          155-06046-0000         INSTALLATION DWG    RF    .00

Impress Tryout

Preliminary - Subject To Change Without Notice

Summary of Contents for KT73































































































Reviews:

No comments