Honeywell KHF 1050 System Installation Manual Download

Page: 56 / 204

KHF 1050 SYSTEM INSTALLATION MANUAL

Page 30

Revison 2

23-10-09

Apr/2006

Table 31 - KAC 1052 Leading Particulars

Antenna Matching
Capability:

Wire Antenna:

10 to 25 feet grounded (55,000 feet maximum altitude).

25 to 30 feet may be grounded or ungrounded. If ungrounded,
30,000 feet max altitude.

30 to 75 feet ungrounded (30,000 feet maximum altitude)

Shunt Antenna

Typically leading edges of the vertical stabilizer 10 feet or
longer.

Internal Protection:

High SWR due to change in antenna impedance will force a
retune. An internal bleeder resistor provides a static discharge
path to ground.

Should the coupler not be able to tune the antenna at a given
frequency, a tune fault will result after the coupler has
attempted different network configurations to tune the antenna.

TSO:

Compliant to DO-163, DO-178B Level C, E/TSO-C31d and
E/TSO-C32d.
Also see

“ENVIRONMENTAL QUALIFICATION APPENDIX”

CHARACTERISTIC

DESCRIPTION

Summary of Contents for KHF 1050













































































































































































































Search results

Summary of Contents for KHF 1050

Reviews:

Related manuals for KHF 1050

Brands by name

Popular brands

Honeywell KHF 1050, System Installation Manual

Search results

Summary of Contents for KHF 1050

Reviews:

Related manuals for KHF 1050

Brands by name

Popular brands