16
IMPORTANT NOTE:
In the event that these conditions can not be met (for example
certain laptop configurations or co-location with another transmitter), then the FCC
authorization is no longer considered valid and FCC ID can not be used on the final
product. In these circumstances, the OEM integrator will be responsible for re-
evaluating the end product (including the transmitter) and obtaining a separate FCC
authorization.
End Product Labeling:
This transmitter module is authorized only for use in device where the antenna may
be installed such that 20cm may be maintained between the antenna and users.
The final end product must be labeled in visible area with the following: “Contains
FCC ID: HD5-IM11R”. The grantee’s FCC ID can be used only when all FCC
compliance requirements are met.
Manual Information to the end user:
The OEM integrator has to be aware not to provide information to the end user
regarding how to install or remove this RF module in the user's manual of the end
product with integrates this module. The end user manual shall include all required
regulatory information/warning as shown in this manual.
