manualshive.com logo in svg

Honeywell HX2, Reference Manual

The Honeywell HX2 is a superior product designed to enhance productivity and efficiency. To fully utilize its potential, make sure to download the comprehensive Reference Manual, available for free on our website. Discover all the features and capabilities of the Honeywell HX2 by accessing the manual directly from manualshive.com.

Share
Download
background image

Avalanche Update using File > Settings

Use these menu options to setup the Avalanche Enabler on the HX2. Change the settings and save them by rebooting before
connecting to the network.

Alternatively, the Mobile Device Server can be disabled until needed (refer to the

Wavelink Avalanche Mobility Center

User’s Guide

for details).

Menu Options

Note:

Your HX2 screen display may not be exactly as shown in the following menu options. Contact

Technical Assistance

for version information and upgrade availability.

Connection

Enter the IP Address or host name of the Mobile Device Server. Set the order in which serial ports or
RF connections are used to check for the presence of the Mobile Device Server.

Server Contact

Setup synchronization, scheduled Mobile Device Server contact, suspend and reboot settings.

Data

Control when data is transferred between the HX2 and the Mobile Device Server.

Preferences

Set options for Enabler startup or shutdown and logging. If the Preferences tab is not present, you
may have an older version of the Enabler with the Startup/Shutdown tab.

Display

Set up the Windows display at startup, on connect and during normal mode. The settings can be
adjusted by the user.

Taskbar

Set options for Taskbar. If the Taskbar tab is not present, you may have an older version of the Ena-
bler with the Startup/Shutdown tab.

Execution

Not available in this release

. Use AppLock instead, which is resident on each device.

Scan Config

This option allows the user to configure Enabler settings using a special bar code that is created by
the Avalanche MC Console.

Scan Config not currently supported.

Shortcuts

Add, delete and update shortcuts to user-allowable applications.

SaaS

Configure the Enabler to connect with Avalanche on Demand.

Adapters

Enable or disable network and wireless settings. Select an adapter and switch between the Ava-
lanche Network Profile and manual settings.

Status

View the current adapter signal strength and quality, IP address, MAC address, SSID, BSSID and
Link speed. The user cannot edit this information.

Startup/Shutdown

Set options for Enabler program startup or shutdown. Replaced by Preferences and Taskbar tabs in
some versions of Enabler.

5-9

Summary of Contents for HX2























































































































































































































































































































Reviews:

No comments

Related manuals for HX2

Ebyte E43-900T13S3 Manual preview
E43-900T13S3
Brand: Ebyte Pages: 8
Paradyne MCC Installation Instructions Manual preview
MCC
Brand: Paradyne Pages: 11
Paradyne Hotwire 8784 Installation Instructions Manual preview
Hotwire 8784
Brand: Paradyne Pages: 19
Paradyne COMSPHERE 3550 Series User Manual preview
COMSPHERE 3550 Series
Brand: Paradyne Pages: 153
Paradyne Jetstream CPX-1000 Reference Manual preview
Jetstream CPX-1000
Brand: Paradyne Pages: 141
Black Box LT2060A Manual preview
LT2060A
Brand: Black Box Pages: 37
Cromemco 32K Bytesaver Instruction Manual preview
32K Bytesaver
Brand: Cromemco Pages: 46
Verizon Wireless PC 3220 Owner'S Manual preview
PC 3220
Brand: Verizon Wireless Pages: 39
Idis DR-1508P Operation Manual preview
DR-1508P
Brand: Idis Pages: 85
Air Live AirVideo-100 Quick Setup Manual preview
AirVideo-100
Brand: Air Live Pages: 2
FOR-A USF-105PS Operation Manuals preview
USF-105PS
Brand: FOR-A Pages: 37
Brickcom NR-2008 User Manual preview
NR-2008
Brand: Brickcom Pages: 184
National Instruments PXI Express PXIe-1085 Series User Manual preview
PXI Express PXIe-1085 Series
Brand: National Instruments Pages: 89
ZALMAN CNPS9700 LED User Manual preview
CNPS9700 LED
Brand: ZALMAN Pages: 8
PairGain T1L2F10A Manual preview
T1L2F10A
Brand: PairGain Pages: 76
AMD B59 User Manual preview
B59
Brand: AMD Pages: 10
IEI Technology IMBA-C604EP User Manual preview
IMBA-C604EP
Brand: IEI Technology Pages: 213
Whirlwind PYROBOX Technical Specifications preview
PYROBOX
Brand: Whirlwind Pages: 1

Brands by name

Popular brands

Load more brands