Honeywell HWF2A-COM, Installation And Setup Manual

Page: 13 / 28

11
Programmer Keyboard Commands
Programmer keyboard commands can be used to quickly view your connectivity settings and options. Most
commands require you to press the [Shift] key and then the designated command key. (See the keys desig-
nated in red on the 7720P Programming Tool.)
[A]
HWF2V-COM
x.x.xx mm/dd/yy
Software Revision
"x.x.xx" indicates the installed software Revision.
Mm/dd/yy indicates month, day and year of the revision.
[A]
HWF2A-COM
x.x.xx mm/dd/yy
Software Revision
"x.x.xx" indicates the installed software Revision.
Mm/dd/yy indicates month, day and year of the revision.
Identification Displays
[B]
MAC xxxxxxxxxxxx
MAC CRC yyyy
MAC Address
“xxxxxxxxxxxx” indicates the communicator's unique identifica-
tion number.
"yyyy" indicates the MAC CRC number. This number is found
on the box and inside the communicator.
Press the [Space] key to go to the next field.
Press the backspace [BS] key to go to the IMEI display (if the
communication path includes cell).
NOTE : The SCID and IMEI are displayed only if the communication path includes cell.
SCID xxxxx xxxxx
xxxxx xxxxx
SCID Display
Displays the identification number assigned to the SIM card
(SCID) in this device.
Press the [Space] key to go to the next field.
Press the backspace [BS] key to go to the previous field.
IMEI xxxxxxxx
xxxxxx x
IMEI Display
Displays the identification number assigned to the commu-
nicator.
Press the [Space] key to get the MAC Address.
Press the backspace [BS] key to go to the previous field.
[C]
Mon 01 Jan 2001
05:48:39 am
Time
Retrieves the current date and time from the AlarmNet network
in Greenwich Mean Time (GMT). This display confirms that the
communicator is in sync with network.