Rev 1.02
48
Document 900.0328
05/05
System Configuration
We recommend that you connect one trigger to the ignition and configure it as a wakeup
trigger.
Note
Be careful when you modify triggers. For example:
•
Ensure that you have at least one trigger set as a wakeup.
•
A rule that is based on a trigger may not function if that trigger is
modified.
To configure connected triggers on a connected recorder:
1.
From the Recorder Summary in the HTRD400 System Setup Wizard, click Next.
2.
Double-click a trigger (or select a trigger and then click Edit). The Edit Trigger dialog
box displays (see
Figure 5-7
Trigger Summary / Edit Trigger
Summary of Contents for HTRD400
