Honeywell HTRD400, Reference Manual, Page: 50 / 176

Rev 1.02 36 Document 900.0328
05/05
System Configuration
Table 5-1 details the tasks you can perform using the Toolbox application when you are
offline, connected to a recorder, or connected to a recorder and one or more cameras.
Table 5-1 System Tasks
Connected to
System Tasks Offline Recorder Recorder
and
Cameras
System Configuration Setup
Configure recorder
Assign a name
✓ ✓ ✓
Set date and time
✘ ✓ ✓
Synchronize time to PC
✘ ✓ ✓
Set automatic Daylight Saving
Time
✘ ✓ ✓
Enable password protection
✘ ✓ ✓
Set recording mode
✓ ✓ ✓
Set record delay
✓ ✓ ✓
Set standby delay
✓ ✓ ✓
Configure triggers
Assign a name
✓ ✓ ✓
Set polarity
✓ ✓ ✓
Set wake-up status
✓ ✓ ✓
Verify trigger status
✘ ✓ ✓
Enable/disable a trigger
✓ ✓ ✓
Configure cameras
Assign a name
✓ ✓ ✓
Set up a camera and enable
audio
✘ ✘ ✓
Verify aim, focus, coverage,
audio
✘ ✘ ✓
Configure GPS
Enable GPS data gathering when
a rule is active
✓ ✓ ✓
Configure record rules
Assign a name, description, and
enable a rule
✓ ✓ ✓
Add enabled trigger to rule
✓ ✓ ✓
Set a record schedule
✓ ✓ ✓