HTRD400 System Reference Guide
Rev 1.02
105
Document 900.0328
05/05
4.
Select the recorder and click Connect (or double-click the recorder name).
5.
Load the desired clip (see
Searching for Clips on a Connected HTRD400 Recorder
) and then locate the area of interest.
6.
Click Save
. The Save As dialog displays.
Figure 8-8
Save As—Archive Entire Clip
7.
Select a destination folder to save the clip. You can either accept the default location
(C:\BusView\Archives\) or enter another file path.
8.
When prompted, create a name for the file.
9.
Select a file type. The options available depend on whether you are archiving from a
connected recorder or from an existing archive on a PC or laptop. In either case, we
recommend that you select the default file type.
10. In the Save as range field, select either:
•
Entire clip
•
Current location to end of clip
•
From beginning of clip to current location
•
For the next [number of] minutes from current location
11. Click Save. The information automatically copies to the archive drive, without erasing
the source information on the recorder hard drive.
Archiving a Single Still Image From an HTRD400 Recorder
Note
You can also save an image from an archive.
Summary of Contents for HTRD400
