ENGLISH
OPERATING INSTRUCTIONS
The height of the fan can be adjusted by loosening the height
adjustment ring, carefully raising or lowering the fan to the
height required and then firmly tightening the height adjustment
ring.
Speed Knob
The speed of the fan is controlled by rotating the speed knob. The
number will indicate which of the three speeds is in effect:
0 = Off; 1 = Low; 2 = Medium; 3 = High
Oscillation
To make the fan oscillate, press down on the oscillating control
knob located on the top of the motor housing. To stop oscillation,
pull up on the knob.
Tilt Adjusting
To adjust the airflow upward or downward, loosen the screw,
gently push the grilles (1,5) to the desired position and retighten
the screw.
CLEANING AND STORAGE
Cleaning
1. Unplug the fan from the electricity supply.
2. Only use a soft cloth to gently wipe the fan clean.
3. DO NOT immerse the fan in water and never allow water to drip
into the motor housing.
4. DO NOT use petrol, paint thinner or other chemicals to clean
the fan.
5. Dismantling for cleaning the fan is not recommended. Use
a vacuum cleaner with brush attachment to clean the grilles,
followed by a soft damp cloth.
Storage
For storage, clean the fan carefully as instructed and store your
fan in a cool dry place.
Disposal
:
Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities. Contact
your local government for information regarding the collection
systems available. If electrical appliances are disposed of in
landfills or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your health
and well-being.
CONDITION OF PURCHASE
As a condition of purchase the purchaser assumes responsibility
for the correct use and care of this KAZ product according to these
user instructions.
WARNING: IF PROBLEMS ARISE WITH THIS KAZ PRODUCT,
PLEASE OBSERVE THE INSTRUCTIONS IN THE WARRANTY
CONDITIONS. DO NOT ATTEMPT TO OPEN OR REPAIR THE KAZ
PRODUCT YOURSELF, AS THIS COULD LEAD TO TERMINATION
OF THE WARRANTY AND CAUSE DAMAGE TO PERSONS AND
PROPERTY.
Technical modifications reserved.
