Honeywell HRXDS16, User Manual

Page: 99 / 172

Document 800-04559 Rev D 99
11/09
Configuration
Figure 3-75 System Event — Health Check Screen
2. The DVR can be configured to run self-diagnostics and report the results.
3. Highlight the box beside System, then press
#
to select the interval that you want
the DVR to run self-diagnostics on the system. You can select from 1 hr. to 30
days or Never.
4. Highlight the Setup... box beside Check Recording, then press
#
. The Check
Recording screen appears (see Figure 3-76 ).
Highlight Schedule On, then press
#
to toggle On and Off. When set to On, you
can select the day, time range and interval that you want the DVR to run
self-diagnostics on the recorder. The Interval can be selectable from 1 min. to 7
days or Never. The
box allows you to delete a check recording schedule.
Note The higher the number under the No. heading, the higher its
priority.
Figure 3-76 Check Recording Screen
5. Highlight the box under the Interval column beside each alarm-in and press, then
press
#
to change the interval that you want the DVR to run self-diagnostics on
Alarm Inputs. You can select from 1 hr. to 30 days or Never.
6. Highlight the Storage tab and the Storage screen displays.