Honeywell HRGX161 User Manual Download

Page: 81 / 150

Exporting Video | 81

800-16694 - A - 04/2014

Exporting Video Clips

You can export a customized video clip created during playback.

To export customized video clips:

1. During video playback, use the clipping start/stop function on the playback control panel

to create one or more video clips. See

Creating Video Clips, page 76

2. Close the playback interface. The following message appears: "There are some video clips

to be saved. Do you want to save them now?" Click

Yes

. The

Export

window opens.

3. If you have not already done so, insert a USB flash drive or other external storage device

into the USB port on the DVR, and then click

Refresh

4. Click

Export

to save the video clip(s) to the storage device.

Summary of Contents for HRGX161























































































































































Search results

Summary of Contents for HRGX161

Reviews:

Related manuals for HRGX161

Brands by name

Popular brands

Honeywell HRGX161, User Manual

Search results

Summary of Contents for HRGX161

Reviews:

Related manuals for HRGX161

Brands by name

Popular brands