Honeywell HREP216, User Manual

Page: 140 / 200

140 | Performance Series HREP2 DVR User Guide
www.honeywell.com/security
Click again to stop saving. Click ActiveX Setting to display the context menu where
you can change the saving path.
Printing
1. Click .
2. The current screen will be printed with the printer connected to the PC.
Capturing a Screen Image
1. Click .
2. The current screen of the selected channel will be saved to the path specified in the PC.
The default path is C:\SaveFolder.
Click ActiveX Setting to display the context menu where you can change the saving path.
ActiveX Settings
1. Click (see Figure 9-7 ).
Figure 9-7 ActiveX Settings
2. When the setup screen appears, you can change the settings of the render type, audio,
capture and saving path as well as the video streaming.
Render : DirectDraw is recommended in order to enable the hardware acceleration.
3. If you want to change the saving path, click (Save Folder) and specify a new path.
The Windows Vista user cannot change the saving path.
4. Change the streaming settings according to the PC specification and network
environment.
Auto mode is recommended.
• Sync : If this option is set, the audio signal will be synchronized with the video signal.
However, you may encounter a delay due to buffering for the synchronization.
• Live CH : Set the audio signal to use in live monitoring mode.
• I Frame Only : Only the I frames (key frames) will be transferred.