Network Camera User’s Guide
43/89
To define the gray level of mask block. The smaller value will be darker.
Note that this function is not recommended for camera with PTZ/ePTZ actions.
PTZ Setting
Camera Protocol:
This device can connect to a PTZ camera or speed dome camera and controls them thru
RS485 interface.
Camera Address:
This is the camera ID set in PTZ camera or speed dome camera.
Note
that please DO
NOT change the default value if unnecessary. If so, user needs to check and set value
properly for both sides.
Baud rate:
This is the communication speed between network module and P/T scanner.
Note
If need to change these parameters, user needs to check and set value properly
for both, network module and P/T scanner.