Resetting the Filter Clean Indicator
After cleaning the IFD
™
filter, you need to reset the filter monitor.
• Once the IFD
™
filter has been checked and cleaned, the filter monitor will need to
be reset.
• With the air purifier unit powered on, press and hold the Filter Reset button for
approximately 10 seconds or until the filter bar is clear (Fig. 5).
CLEANING THE PRE-FILTER
To
remove
the pre-filter:
Press the top tab to release the pre-filter from the filter
assembly (Fig. 10).
To
clean
the pre-filter:
The particle pre-filter helps pick-up large airborne particles
that enter the filter. The pre-filter can be removed and
rinsed by hand under warm water (Fig. 11). Let the pre-filter
dry
completely
before inserting it back into the unit.
5
REMOVING / CLEANING THE IFD
™
FILTER (
CONTINUED
)
REPLACING THE ULTRAVIOLET (UV) LAMPS
The UV Reset LED light will illuminate when it is time to
replace the dual UV bulbs.
• Be sure to turn off and unplug your air purifier.
• Press the Filter Release button and remove the filter
assembly.
• The UV bulb housing is on the left and has a finger grip
for ease of removal (Fig. 12). Gently remove the UV bulb
housing.
• Turn the tab towards the unlock symbol (
) (Fig 13).
• Gently grasp the top of the tab and pull the bulb cartridge straight out of the UV
socket. Do not touch the bulb directly with your hands.
• Do the same for the bottom tab and pull the bulb cartridge out of the UV socket.
• Replace the top and lower UV bulb sockets.
• The bulb cartridge will only fit one way; if it does not fit, turn the bulb cartridge
the other way (with the arrow pointing to the center of the unit) and insert.
• Push down gently so that the bulb cartridge engages with the unit. Turn arrow to the lock position (
).
• Discard old UV bulb cartridge(s) only at household hazardous waste collection sites.
• Place UV bulb housing back in air purifier housing and then insert IFD
™
filter assembly.
• With the air purifier powered on, press and hold the UV reset button . (Fig. 14).
NOTE:
Bulb and bulb housing are not intended for use with any other product or purpose.
Fig. 14
Fig. 12
Fig. 13
Fig. 10
Fig. 11
Fig. 5
HHT-215_HHT-217_OM.qxd 10/20/06 5:02 PM Page 5
