Honeywell HEN04111, User Manual

Page: 148 / 248

www.honeywell.com/security
148 | Embedded Network Video Recorder User Guide
There are six function tabs:
• Preview : You are currently in the Preview mode, where you can see all these tabs.
• Playback : See Playing Back Recorded Video on page 154
• Alarm : See Enabling and Disabling Alarms on page 157
• Set : See Configuring Settings on page 159
• Information : See Configuring System Information on page 208
• Logout : See Logging Out on page 211
Section 2: Monitor Channels
Figure 5-6 Monitor Channels Section
The Monitor Channels section displays monitor channels that are successfully connected to the
NVR. Left-click to select a channel for viewing.
Section 3: Open All Button
Figure 5-7 Open All Button
The Open All button enables/disables all channels in the real-time monitor. You can also select
the Main Stream or Extra Stream .
Section 4: Start Talk Button
Figure 5-8 Start Talk Button
Click to enable communication. Click

in the control panel on the right to select the
bi-directional communication mode. There are four options for the communication mode:
DEFAULT , G711a , G711u , and PCM .