3.1 CONTROLS AND LCD DISPLAY, CONTINUED
ID
Icon
Usage
Description
Normal:
CLR
Clear. Used to exit menus, clear
an alphanumeric entry, abort an
operation.
DVR:
Frame advance
12
Refer to
Description by
Mode
Auxiliary:
Auxiliary
6
Sequence
Mode
SEQ
Places the controller in Sequence
Mode. Sequences are
programmed in the VideoBloX
Configuration software.
Forward/Fast Forward (Alt +
/
)
DVR:
/
13
Refer to
Description by
Mode
Auxiliary:
Auxiliary
7
Normal:
Alm
Ack
Alarm Acknowledge
DVR:
Record
14
Refer to
Description by
Mode
Auxiliary:
Auxiliary
8
15 DVR
The DVR key functionality is dependent on the VideoBloX
software configuration.
•
Press the DVR key to place the system in Device/DVR
mode. The DVR LED lights solid. Continue pressing
the DVR key to scroll through the available devices
(DVR, VCR, MUX). When the desired device type is
displayed, enter the device # and then press Enter or
press the + and – keys to scroll through the available
devices of that type.
•
The device functions available are aligned with the
DVR key.
•
To exit this mode press a different mode key such as
camera, monitor, etc. (LED will not be lit.)
16 AUX
Auxiliary
Used to access PTZ or Device/DVR Auxiliary functions.
The functionality is dependent on the device database
selected or the PTZ protocol selected.
•
Press this key once to perform a single auxiliary
command. (LED will blink until command is
performed).
•
Press this key twice to lock the controller in Auxiliary
mode. (LED will remain lit.)
•
To exit Auxiliary mode, press the key again (LED will
not be lit.)
17
User 3 / 4
Users 3 and 4 are defined in the VideoBloX Configuration
Software under the User Tab (Configurable Keys) or the
Keyboards Tab (Configurable Keys). The programming in
the Users tab has priority over the Keyboards tab.
Pressing User 3 / 4 triggers the sequence or group
assigned to User 3. Pressing Alt+User 3 / 4 triggers the
sequence or group assigned to User 4.
Rev. 1.01
6
900.0799
20-Jun-06
