manualshive.com logo in svg

Honeywell HDZ20HD, User Manual, Page: 52 / 164

Share
Download
Honeywell HDZ20HD User Manual Download Page 52

www.honeywell.com/security

52  |  HDZ Series IP PTZ User Manual

Video OCX Protocol Settings

The Video OCX Protocol setting is used to select the Video Streaming Protocol for the camera. 
There are various options to transmit streaming video over the network (see 

Table 4-2

 on 

page 52

). Choose the Video Streaming Protocol that best fits your viewing requirements and 

network properties (see 

Figure 4-3

).

Note

OCX protocol settings will only apply to video streams using a Honeywell Viewer.

Figure 4-3

Video OCX Protocol Settings

Choose the video OCX protocol that best fits your data delivery requirements (see 

Table 4-2

).

Table 4-2

Video OCX Protocol Options 

OCX Option

Description

RTP over UDP 

(default setting)

Provides an up-to-date video stream although some images may be 
dropped. Suitable for both an intranet and the Internet where there is 
no NAT firewall.

RTP over RTSP (TCP)

Uses TCP for increased delivery reliability. Suitable for the Internet 
where firewalls are used and where an RTSP proxy is available.

Summary of Contents for HDZ20HD





































































































































































Reviews:

No comments