Honeywell HDZ20HD, User Manual, Page: 47 / 164

Configuring Video and Audio Streaming | 47
800-11873V4 - A - 07/2014
2. In the Video Resolution drop-down list, select one of the following quad/triple/dual/single
stream options:
3. Select a resolution option for each of the streams that you selected with the Video
Resolution drop-down list (see Figure 4-1 ). The number of resolution and frame rate
options that are available will depend on your camera model and which stream option you
selected in
step 2 , above. Keep in mind that if higher resolutions are selected, the amount
of bandwidth used by the camera will also increase.
4. Click the Save button directly below the Video Resolution options.
Note Image attachment by FTP or E-mail is only available when MJPEG streaming is
selected. Select one of the MJPEG stream options (see
Table 4-1 ), if you want to
use this feature.
Setting the Text Overlay
You can superimpose text over the video image. The superimposed text can be the date, the
time, an event message, or a text string of your choosing (up to 20 alphanumeric characters).
See
Figure 3-8 on page 44 to see an example of the browser with the text overlay displayed on
the video image.
1. Click the Streaming tab ( Video Format is selected in lefthand column).
2. Under Text Overlay Settings , select one or more of the following check boxes:
3. If you selected the Include text string check box, type a text string in the corresponding
text box (maximum 20-characters).
4. If you selected the Event Message check box, a message of M will appear overlayed on
the video when a motion event occurs. A message of
A1
–
A4
will appear when an alarm
1–4 event occurs.
5. Click the Save button directly below the Text Overlay Settings options.
Setting the Video Rotate Type
Depending on the installation environment of your HDZ Series IP PTZ dome camera, you may
need to modify the way video is displayed on a monitor or web browser. The video rotate type
options allow you to flip the video image vertically or horizontally, or rotate the video image, as
needed. To set the video rotate type:
1. Click the Streaming tab ( Video Format is selected in lefthand column).
• H.264 Only • MJPEG Only
• H.264 + H.264 (default) • MJPEG + H.264
• H.264 + H.264 + H.264 • MJPEG + H.264 + H.264
• H.264 + H.264 + H.264 + H.264 • MJPEG + H.264 + H.264 + H.264
• Include date • Include time
• Include text string • Event message