background image

2   

HD40H(X)/HD30H(X)/HD31H(X) Camera User Guide 

800-18605 – Rev A – 06/2014

 

Thank you for purchasing our product. If there are any questions, or 

requests, please do not hesitate to contact the dealer. 

This manual applies to HD40H(X), HD30H(X) and HD31H(X) cameras. 

The information in this publication is believed to be accurate in all respects. 

However, Honeywell cannot assume responsibility for any consequences 

resulting from the use thereof. The information contained herein is subject 

to change without notice. Revisions or new editions to this publication may 

be issued to incorporate such changes. 

Regulatory Information 

FCC Information 

FCC compliance: 

This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to part 15 of the FCC 

Rules. These limits are designed to provide reasonable protection against 

harmful interference in a residential installation. This equipment generates, 

uses, and can radiate radio frequency energy and, if not installed and used 

in accordance with the instructions, may cause harmful interference to 

radio communications. However, there is no guarantee that interference 

will not occur in a particular installation. If this equipment does cause 

harmful interference to radio or television reception, which can be 

determined by turning the equipment off and on, the user is encouraged to 

try to correct the interference by one or more of the following measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 

Summary of Contents for HD30H(X)























Reviews: