Honeywell HBD2FR1, User Manual

Page: 21 / 82

Installing the Camera | 21
800-13338 - A - 03/2013
Mounting the Camera to a 4S Electrical Box
To mount the camera to a 4S box using the adapter plate
1. Attach the base of the camera mounting bracket to the supplied adapter plate using the
four supplied M5×20 machine screws and nuts.
2. Attach the adapter plate to a 4-inch square electrical box using suitable mounting
hardware (not supplied).
Note 4S boxes have either two or four screw holes.
Connecting the Cables
Power over Ethernet (PoE)
Connect a Category 5/5e Ethernet cable to the RJ45 jack on the camera’s PoE cable to create
a network connection and to power the camera.
WARNING
To ensure compliance with electrical safety
standards, use an NRTL-listed PoE injector or network switch
meeting the IEEE 802.3af standard to power the camera.
4S Box
Adapter Plate