
2 | HB273(X) True Day/Night IR Bullet Camera
www.honeywellvideo.com
www.honeywellvideo.com
+1.800.323.4576 (North America only)
© 2012 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any
means without written permission from Honeywell. The information in this publication is believed to be accurate
in all respects. However, Honeywell cannot assume responsibility for any consequences resulting from the use
thereof. The information contained herein is subject to change without notice. Revisions or new editions to this
publication may be issued to incorporate such changes.
Document 800-11940V1 – Rev A – 10/2012
3. Package Includes
•
Camera (1)
•
Quick Install Guide (1)
•
User Guide (1)
•
Bracket (1)
•
Screws (3)
•
Video test cable (1)
•
2-conductor pigtail (1)
4. Key Features
•
1/3
″
Interline Transfer CCD
•
True Day/Night with movable IR cut filter
•
620 TV lines resolution
•
9–22 mm VFAI lens, F1.8
•
0 lux minimum illumination (IR LEDs on)
•
Up to 100 ft (30 m) of IR illumination, depending on scene reflectance
•
Sens-up (×2 to ×1024)
•
Digital noise reduction (DNR)
•
Backlight compensation (BLC)
•
Motion detection (4 zones)
•
Privacy masking (8 zones)
•
On-screen display (OSD)
•
Dual power (24 V AC/12 V DC)
•
Weatherproof housing with adjustable sunshield
5. Connecting the Cables
6. Setting Up the Camera
1.
Unscrew the front part of the housing to expose the lens, LEDs, and the
camera control board.
2.
Using the supplied video test cable, connect a portable monitor to the 2-
pin video out connector on the camera control board.
3.
Adjust the focus (far/near) and zoom (tele/wide) controls.
4.
Configure the camera on-screen display (OSD) menu settings using the
OSD controller on the camera control board.
Video (Yellow)
BNC
Power (Red)
24 VAC/12 VDC
Power (+)
Power (–)
POWER
Video Signal
Video GND
VIDEO
OSD Controller
Focus
Zoom
Video
Out
7. Specifications
Video Standard
NTSC/PAL
Scanning System
2:1 interlace
Image Sensor
1/3” Interline Transfer CCD
Number of Pixels (H × V)
768 × 494 (NTSC)
752 × 582 (PAL)
Minimum Illumination
0 lux (IR LEDs on)
Horizontal Resolution
620 TVL
Video Output
1.0
V
p-p, 75 ohms
Sync System
Internal/Line lock
S/N Ratio
50 dB or more (AGC off)
Lens Type
9–22 mm VFAI, DC drive
IR LEDs
850 nm, 42 LEDs
IR Illumination Distance
Up to 100 ft (30 m), depending on scene reflectance
DNR
Auto/Off/Low/Mid/High
BLC/HSBLC
Off/On
Day/Night
Color/BW/Auto/Ext
Gain Control
Off/Low/Mid/High
White Balance
ATW/AWC/Manual
Sens-Up
Auto (×2 to ×1024)
Motion Detection
Off/On (4 programmable zones)
Privacy Masking
Off/On (8 programmable zones)
D-WDR
Off/On (Level adjustable)
Sharpness
Off/On (Level adjustable)
Mirror
Horizontal
Smart IR
On/Off (Level adjustable)
Input Voltage
24 V AC/12 V DC
Power Consumption
10 W (max)
Temperature
Operating: 14°F to 122°F (–10°C to 50°C), RH 95% max
Storage: –4°F to 140°F (–20°C to 60°C), RH 95% max
Rating
IP66
Dimensions (L × W × D)
5.51” × 3.58” × 3.15” (140 mm × 91 mm × 80 mm)
Weight
2.2 lb (1 kg)
8. Dimensions
8.07
″
(205 mm)
5.51
″
(140 mm)
3.58
″
(91 mm)
3.03
″
(77 mm)
3.15
″
(80
m
m
)
5.
51
″
(
140
m
m
)