Page 28
MS-9
Figure 13. Typical Schematic of LP Piping
6. After completing piping, check all LP lines and connections for leaks following accepted
standards and practices.
Do not operate the system until all leaks are repaired.
NOTE
The LP piping system shown in Figure 13 is designed for optimum performance
at ambient air temperatures above 40
o
F (5°C). For operation in ambient
temperatures below 40
o
F, consult Eclipse for recommendations.
CAUTION
Eclipse
strongly recommends
that a bypass flow control valve
and
a
backpressure regulator be installed in all LP systems and piped as
shown in Figure 13.
X7869
(NOT TO SCALE)
Summary of Contents for Hauck MEGASTAR MS-150
