Honeywell H.264 HRDP User Manual Download

Page: 101 / 106

HRDP H.264 Rev B DVR User Guide

______________________________________________________________________________________________

Document 800-06801 Rev F

101

02/13

Numeric Buttons and Rec

Numeric

In live and search modes, press to watch
that channel full screen.

Record

In live mode, press to start instant
recording of all channels.

Directional and Playback Control Buttons

Live

Go to PTZ mode.

PTZ

Adjust zoom, focus, and iris on a
PTZ channel.

Search

Start reverse playback of
recordings. Press successively to
change the fast reverse speed.

Search-Pause

Frame back (I-Frame Only).

Live

Start playback of the latest
recordings.
(By default, the system searches

recordings in the past 30 secs. If
no recording is archived, the
system will play back the latest
one.)

PTZ

Adjust zoom, focus, and iris on a
PTZ channel.

Search

Start playback of recordings. Press

successively to change the fast
forward speed.

Search-Pause

Frame Forward.

Navigation

Move up.

PTZ

Move the camera view point
up.

Navigation

Move to the right.

PTZ

Move the camera view point to the right.

Search

Play recorded videos. When pressed
successively, the search jumps forward in
time by 30 minute increments.

Search-Pause

Step forward one frame.

PTZ

REPLAY

Summary of Contents for H.264 HRDP











































































































Search results

Summary of Contents for H.264 HRDP

Reviews:

Related manuals for H.264 HRDP

Brands by name

Popular brands

Honeywell H.264 HRDP, User Manual

Search results

Summary of Contents for H.264 HRDP

Reviews:

Related manuals for H.264 HRDP

Brands by name

Popular brands