manualshive.com logo in svg

Honeywell GSMVLP5-4G, Installation And Setup Manual, Page: 3 / 4

Share
Download
Honeywell GSMVLP5-4G Installation And Setup Manual Download Page 3

 

5000-100-154-V2

SCREW

(3)

ROTATED

180 

CONNECTOR

BOARD

RJ45

RECEPTACLE

CONNECTOR BOARD

RECEPTACLE

ILP5

LYNX TOUCH

TIE

WRAP
POINT

REMOVE ILP5

SPACER

ILP5 SPACER

REMOVE ILP5

KNOCKOUT

TIE

WRAP

(1)

RJ45 RECEPTACLE

LYNX TOUCH

ALTERNATE INSTALLATION

LOCKING TABS

ETHERNET CABLE

TO ILP5

 

Figure 3. Installing the ILP5 in the LYNX Touch 

 

 
 
 
 
Electrical Specifications 

 

GSMVLP5-4G/GSMVLP5CN-4G 

Voltage Input 

5V (provided by the control panel) 

Current  

Idle 

15 mA, standby 

Average 

300mA, average transmit 

Peak 

1.6A peak transmit, 25% duty cycle 

ILP5  

Voltage Input 

5V (provided by the control panel) 

Current: 

83 mA, 100 Base T with traffic 

 

41 mA , 10 Base T with traffic 

Summary of Contents for GSMVLP5-4G

Page 1: ...d including interference that may cause undesired operation IC MODEL LYNXTOUCH2 FCC ID CFS8DLLYNXTOUCH2 CONTAINS MODULE FCC ID QIPPH8 IC 7830A PH8 IC MODEL PH8 Figure 1 FCC IC Label Location 2 Release the LYNX Touch front case from the back case by depressing the two locking tabs at the top of the unit with the blade of a medium size screwdriver Refer to Figure 2 3 Install the GSMVLP5 4G GSMVLP5CN...

Page 2: ...fer to Figure 3 3 Remove the ILP5 receptacle knockout from the left side of the LYNX Touch back case Refer to Figure 3 4 Install the ILP5 into the LYNX Touch control front case Ensure that the connector board is properly seated into the receptacle on the control Refer to Figure 3 5 Secure the ILP5 with the three provided screws Refer to Figure 3 6 Insert the ILP5 receptacle and spacer into the slo...

Page 3: ...ALTERNATE INSTALLATION LOCKING TABS ETHERNET CABLE TO ILP5 Figure 3 Installing the ILP5 in the LYNX Touch Electrical Specifications GSMVLP5 4G GSMVLP5CN 4G Voltage Input 5V provided by the control panel Current Idle 15 mA standby Average 300mA average transmit Peak 1 6A peak transmit 25 duty cycle ILP5 Voltage Input 5V provided by the control panel Current 83 mA 100 Base T with traffic 41 mA 10 Ba...

Page 4: ...ed Move the radio or television receiver away from the receiver control Move the antenna leads away from any wire runs to the receiver control Plug the receiver control into a different outlet so that it and the radio or television receiver are on different branch circuits Consult the dealer or an experienced radio TV technician for help INDUSTRY CANADA CLASS B STATEMENT ICES 003 Class B Notice Av...

Reviews:

No comments