FIGURE 1A:
FIGURE 1B. JUMPER LOCATION:
J1
C1059-00
C0910-00
FIGURE 2A. MODULE MOUNTING
FIGURE 2B:
WITH BARRIER:
C1070-00
2
I56-3550-008
06/19/2018
Page 1: ...VDC supply 2 2 mA Maximum using 80 VRMS supply Temperature Range 32 F to 120 F 0 C to 49 C Humidity 10 to 93 Non condensing Dimensions 4 675 H x 4 275 W x 1 4 D Mounts to a 4 square by 21 8 deep box Accessories SMB500 Electrical Box CB500 Barrier I56 3550 008 Velociti Series WIRING NOTE All wiring must conform to applicable local codes ordinances and reg ulations When using control modules in nonp...
Page 2: ...FIGURE 1A FIGURE 1B JUMPER LOCATION J1 C1059 00 C0910 00 FIGURE 2A MODULE MOUNTING FIGURE 2B WITH BARRIER C1070 00 2 I56 3550 008 06 19 2018 ...
Page 3: ...TO THAT ZONE AND DOES NOT RESULT IN A FAULT IN A SEPARATE ZONE C1017 00 FIGURE 4 TYPICAL FAULT TOLERANT NOTIFICATION APPLIANCE CIRCUIT CONFIGURATION NFPA STYLE Z ALL WIRING SHOWN IS SUPERVISED AND POWER LIMITED MODULE POLARITIES ARE SHOWN IN ALARM EOL RESISTOR IS INTERNAL AT TERMINALS 8 9 UL LISTED EOL RELAY SHOWN ENERGIZED 24 VDC COIL EOLR 1 TO NEXT CONTROL MODULE OR END OF LINE RELAY ONE RELAY R...
Page 4: ...2 VDC MAX TWISTED PAIR IS RECOMMENDED WIRES MUST BE SUPERVISED PER NFPA CONNECT MODULES TO LISTED COMPATIBLE CONTROL PANELS ONLY FROM PANEL OR PREVIOUS DEVICE CONTROL MODULE SPEAKERS MUST BE LISTED FOR FIRE PROTECTION 47K EOL RESISTOR IS INTERNAL AT TERMINALS 8 9 MODULE POLARITIES ARE SHOWN IN ALARM TO NEXT CONTROL MODULE LAST MODULE MUST RETURN WIRES FOR SUPERVISION SUPERVISION AUDIO CIRCUIT WIRI...
