Honeywell GA-SP01, User Manual

Page: 16 / 31

The Sampler
Users Manual
Table 4. Pushbuttons
Pushbutton Description
C
ON/OFF/CALIBRATION
•
To turn on the sampler, press
C
.
•
To initiate a calibration, confirm the sampler is on and then press
C
and hold for 6 seconds.
There will be a beep, the sampler will turn off and upon the next startup the sampler will enter
calibration mode.
•
To turn off the sampler, press
C
and hold for 2 seconds.
BLOCK AIRFLOW
•
To block airflow through the sampler firmly depress the block trigger
Note: Airflow can also be blocked by temporarily kinking the hose or covering the end of the rigid
tube.
8
www.
optimum
stores
.com/bw
Shop for BW products online at: