Honeywell Fire-Lite Alarms MRP-2001, Instruction Manual, Page: 36 / 132

36 MRP-2001 Series Manual — P/N 53040:H 1/26/2017
Installation ANN-BUS Devices
Wiring Configuration
Figure 2.16 illustrates the wiring between the FACP and ANN-BUS devices.
Powering ANN-BUS Devices from Auxiliary Power Supply
Figure 2.17 illustrates the powering of ANN-BUS devices from an auxiliary power supply such as
the FCPS-24FS6/8, when the maximum number of ANN-BUS devices exceeds the ANN-BUS
power requirements.
Figure 2.16 FACP wiring to ANN-BUS Device
FACP
ANN-80
ANN-BUS and power wiring are
supervised and power-limited
TB3
aa
n8
0to
R
P2
00
1.
cdr
Primary ANN-BUS
Figure 2.17 Powering ANN-BUS Devices from FCPS-24FS6/8
ANN-80
FACP
FCPS-24FS6/8
+24 VDC
-24 VDC
ANN-BUS
Cut Ground Fault Detection jumper JP1 (FACP monitors for ground faults)
ANN-BUS and power wiring are
supervised and power-limited
TB3
an
n80
toFC
PSr
p20
01
.cdr
Primary ANN-BUS