Page 4 of 4 — Canadian DF-60954:C • 7/16/2018
This document is not intended to be used for
installation purposes. We try to keep our product
information up-to-date and accurate. We cannot
cover all specific applications or anticipate all
requirements. All specifications are subject to
change without notice.
For more information, contact Fire•Lite Alarms.
(888) 289-1114
10 Whitmore Road
Woodbridge, Ontario LZL 7Z4
www.firelite.com
LiteSpeed™
is a trademark and
Fire-Lite® Alarms
and
System Sensor®
are
registered trademarks of Honeywell International Inc. Microsoft® and Windows® are
registered trademarks of the Microsoft Corporation.
©2018 by Honeywell International Inc. All rights reserved. Unauthorized use of this
document is strictly prohibited.
SYSTEM SPECIFICATIONS
System Capacity
• Intelligent Digital Communication Loops ....................................1
• Addressable device capacity ....................................................50
• Programmable software zones.................................................50
• Annunciators.............................................................................16
Electrical Specifications
AC Power:
Operates in either
120
or
240 VAC, 50/60 Hz, 1.75
A
,
auto-sensing-no switch required
. Wire size: minimum 14
AWG (2.00
mm2) with 600 V insulation. Nonpower-limited, super-vised.
Battery:
Two 12 V 18
AH lead-acid batteries. Battery Charger
Capacity: 7-18
AH (EX-50XC cabinet holds maximum of two 18
AH
batteries.)
Digital Communication Loop:
Supervised and power-limited.
Notification Appliance Circuits:
Terminal Block provides connec-
tions for two NACs, Style Y (Class B) or Style Z (Class A). Special
Application power. Power-limited, supervised circuitry. Maximum sig-
naling current per circuit: 2.5
amps special application, 250mA regu-
lated. End-of-Line Resistor: 4.7k
ohm, ½ watt (P/N 71252 UL listed)
for Style Y (Class B) NAC; system capable of 1.9 k
Ω
- 22
k
Ω
ELR
range. Refer to the
Fire•Lite Device Compatibility Document
for
listed compatible devices.
Two Programmable Relays and One Fixed Trouble Relay:
Con-
tact rating: 2.0
A @ 30 VDC (resistive), 0.5
A @ 30 VAC (resistive).
Form-C relays, non-power-limited, non-supervised.
Cabinet Specifications
Door:
19.26" (48.92 cm.) high x 16.82" (42.73 cm.) wide x 0.72"
(1.82 cm.) deep.
Backbox:
19.00" (48.26 cm.) high x 16.65" (42.29
cm.) wide x 5.25" (13.34 cm.) deep.
Trim Ring (TR-CE):
22.00"
(55.88 cm.) high x 19.65" (49.91 cm.) wide.
Shipping Specifications
Weight:
26.9 lbs. (12.20 kg.)
Dimensions:
20.00” (50.80 cm.) high
x 22.5” (57.15 cm.) wide x 8.5” (21.59 cm.) deep.
Temperature and Humidity Ranges
This system meets requirements for operation at 0 – 49°C and at a
relative humidity 93% ± 2% RH (non-condensing) at 32°C ± 2°C.
However, the useful life of the system's standby batteries and the
electronic components may be adversely affected by extreme tem-
perature ranges and humidity. Therefore, it is recommended that this
system and its peripherals be installed in an environment with a nor-
mal room temperature of 15 – 27°C.
Agency Listings and Approvals
The listings and approvals below apply to the basic ES-50XC control
panel. In some cases, certain modules may not be listed by certain
approval agencies, or listing may be in process. Consult factory for
latest listing status.
•
ULC:
S624