1. Basic equipment
1.3 Electrical wiring
Plug connection (Housing 2...)
Fig. 3.
Wiring
MU2B-0375GE51 R0211A
39
CAUTION
Switch off power before opening.
X
Remove fixing screw
X
Insert screwdriver into the split and
press downwards. The part with
terminals will move out of the
housing.
X
Pull connecting cable (7) through
conduit and wire contacts according
to plan.
X
Place wired contact plate (9) to
desired mounting direction
(4 directions possible) and move
mounting plate back into connector
housing. Refasten cable gland.
Caution: Not fastening cable gland
would cause loss of IP protection and
strain relieve of the cable.
X
Plug Connector (9) to Pins (10) and
fix connector with fixing screw!