Honeywell F111, Product Data, Page: 9 / 12

F111 (SERIES 3) IN CEILING MEDIA AIR CLEANER
9 68-0198—05
6. Be sure both catches are turned down and filter rests
firmly on catches.
7. Install 1 startup-filter in each end of grill.
8. Close and latch the lid.
On initial startup, a small amount of dust can blow from
the air cleaner. This is normal and stops a few minutes after
startup. The startup-filters will catch all the dust. The
startup-filters are placed in the two exit outlets on the grill.
After running the unit for 5 minutes, turn off the unit.
Remove and discard the two start-up filters.
Parts List
Refer to Fig. 9 and Table 5 for replacement part information.
Table 5. Replacement Parts.
Fig.
Reference No. Description Pack Qty Order Number
1
CPZ™ sorbent module (requires 2)—used with HEPA, 95% DOP, or 95%
ASHRAE particle filters
1 32004078-003
Charcoal sorbent module (requires 2)—used with HEPA, 95% DOP or
95% ASHRAE particle filters
1 32004078-002
Permanganate sorbent module (requires 2)—used with HEPA, 95% DOP
or 95% ASHRAE particle filters
1 32004078-004
2 Blower wheel — —
3 Motor capacitor; 120V, 60 Hz — —
4 Motor; 120 V, 3-Speed, 60 Hz, Series 3 — —
5
99.97% HEPA media filter, 4.5”, Series 3 1 32000204-002
95% DOP / hospital grade filter 1 32000203-001
95% ASHRAE particle filter 1 50004739-001
6 Prefilter (disposable) 12 32002307-001
7 Lid assembly with hinges and latches in White Color — —