Honeywell EXWJ400-10, Installation&Operation Manual Book

Page: 17 / 58

- 17 -
Camera Function
7. CAMERA SETUP MENU
a. At main menu, select icon, and press MENU button.
7-1. LENS MODE
①
ZOOM Speed Control
: Set zoom speed 1 to 10, 10 steps.
ZOOM SPEED
1 → 2 → … → 10
②
Start Zoom Ratio
: Set boundary value of WIDE zooming.
START ZOOM x 1 ~ x 36 ( in optical zoom region )
③
End Zoom ratio
: Set boundary value of TELE zooming. It can be set up
to x576 including electronic zoom. ( in case the digital zoom
limit is 16 times ) Once Start Zoom and End Zoom ratio are set,
Camera moves to setting zoom times simultaneously as it is
enabled to move to the desired position.
END ZOOM x 36 ~ x 576 ( in digital zoom region )
④
E-Zoom Control
: ON means up to x576, OFF means only optical zoom
region.
E-
ZOOM OFF → ON.
⑤
Set Focus Mode
: Three modes are available
AUTO
:It is used to focus automatically at all times.
MANUAL
: It is used to focus manually by pushing NEAR(+) / FAR(-
)key. When MANUAL mode is selected, it will focus for about 5
seconds after zoom in(TELE) / out(WIDE), and return to
MANUAL mode automatically. This is useful to focus
accurately after zooming.
(In MANUAL mode, when it is powered not to focusing, it
will be returned to the setting before power off.)
ONESHOT
: It is similar to MANUAL mode, but some differences do
exist. In case the focus mode is ONESHOT, it is focused
whenever ONESHOT (AUTO/MANUAL key) key is pushed. It
will be returned to MANUAL mode after seconds (Special
Menu : O.S. AF TIME) if best focus cannot be found. In this
case, press ONESHOT(AUTO/MANUAL key) key again to set
to the best focus.
PUSHAUTO (option)
: While key is pressed, Focus mode will remain AUTO.
☞
caution
1. According to the Model , order is Auto -> Manual ->
Oneshot, or Auto > Manual -> Pushauto.
<< CAMERA SETUP >>
AE MODE
WB MODE
BLC MODE
PZM SET
NIGHTSHOT
CAMERA ID
RETURN
LENS MODE
< CAMERA SETUP menu>
<< LENS MODE >>
ZOOM SPEED
START ZOOM
END ZOOM
AF MODE
O. RESET
O. AF TIME
MIN. DIST
RETURN
10
1
400
AUTO
OFF
5
50CM
< LENS MODE setup >
ENG