Honeywell Experion MX Operator'S Manual Download Page 78

Page: 78 / 170

EXPERION MX RAE STATION LAYOUT

6510020335

Button

Description

Group

–

Call up the group display for the selected object. If there

is no associated group display, this button invokes the group
command and requires a group number to be entered.

Trend

–

Call up the trend display for the selected object. If there is

no associated group display, this button invokes the trend
command and requires a trend number to be entered.

Mini-Profile opens the Mini-Profile dialog box.

Mini-Trend opens the Mini-Trend dialog box.

Simple Recipe Change Button

–

Lets the operator to load the new

recipe

The Scan button moves the sensor to an on-sheet status.

Scanner Control opens the C-Frame Control display.

Offsheet moves the sensor to an Offsheet status.

About Station opens a display listing version and copyright
information.

Help opens the Help file.

Exit Station exits the station.

4.2.1

QCS System Setup and Debug

The QCS System Setup and Debug popup is used to change several QCS- specific settings
and to invoke other debug windows. The buttons available on this popup depend on the

Summary of Contents for Experion MX











































































































































































Search results

Summary of Contents for Experion MX

Reviews:

Related manuals for Experion MX

Brands by name

Popular brands

Honeywell Experion MX, Operator'S Manual

Search results

Summary of Contents for Experion MX

Reviews:

Related manuals for Experion MX

Brands by name

Popular brands