manualshive.com logo in svg

Honeywell Ex-Or Mid-Bay MS1200DIMBW, Installation And Commissioning Instructions, Page: 1 / 4

Share
Download
Honeywell Ex-Or Mid-Bay MS1200DIMBW Installation And Commissioning Instructions Download Page 1

Mid-Bay:  MS1200DIMBW for DSI ballasts

MS1200DALIMBW for DALI ballasts

Hi-Bay:  MS1200DIHBW for DSI ballasts

MS1200DALIHBW for DALI ballasts

Mid-Bay & Hi-Bay LightSpot Luminaire Controllers

Note: HP2000 (or HP10*/HP18*) required for commissioning

HC5, HC6 or HP18 required for user override

* Please note that the HP10 and HP18 offer different/limited programming options 

Installation and Commissioning

Instructions

Summary of Contents for Ex-Or Mid-Bay MS1200DIMBW

Page 1: ...asts MS1200DALIHBW for DALI ballasts Mid Bay Hi Bay LightSpot Luminaire Controllers Note HP2000 or HP10 HP18 required for commissioning HC5 HC6 or HP18 required for user override Please note that the HP10 and HP18 offer different limited programming options Installation and Commissioning Instructions ...

Page 2: ...osition for the detector is in the middle of the luminaire Where this is not possible and the detector is fitted near one end of the lamps please ensure that the detector is at the cold end of the lamps In order to achieve satisfactory light level regulating operation a detector must observe a substantially greater proportion of artificial light from the luminaire s under its control than from nei...

Page 3: ...t settings Tips i Where there are only two options such as ON OFF a double click of the OK button toggles between them ii Where there are multiple options a double click of the OK button recalls a list of all options for that parameter Use the UP DOWN and OK buttons to select iii Use the OK button to go forward through the menus without displaying help pages iv Press UPLOAD at any time to transfer...

Page 4: ...x meter on the working plane to remain constant when daylight illuminates the ceiling and the working plane to a differing extent Therefore products of this type should be regarded as capable of maintaining anAPPROXIMATE light level only 6 In order to achieve satisfactory light level regulating operation a detector must observe a substantially greater portion of artificial light from the luminaire...

Reviews:

No comments