Honeywell EQUIP HD4HDIH, User Manual

Page: 54 / 90

54
IP Camera Web Client
Compression Settings
The video signal sent from the camera to the web client has a number of settings that can
be edited which affect how the video displays in the web client. The Compression Settings
view enables you to configure these settings:
•
Stream Type
• Enable / Disable the Secondary Stream (Secondary stream only)
• Resolution
• Frame Rate
• Priority ( Quality or Bit Rate )
• Compression Ratio (if Quality is chosen as the priority)
• Target Bit Rate (if Bit Rate or Frame Rate is chosen as the priority)
• Maximum Bit Rate that the camera will provide across the network (if Quality is
chosen as the priority)
• GOP (number of frames) / Key Frames
Figure 4-8 Compressions Settings Tab: Primary Stream
Your HD4 series camera supports simultaneous video streams. The Primary stream
delivers H.264 compressed video in real time 30 fps at 1280 x 720 resolution.The
Secondary stream delivers MJPEG compressed video in real time 30 fps at 640 x 360
resolution.