Honeywell enviracaire 61200 Series Owner'S Manual Download Page 5

Your Honeywell air cleaner has six
basic components: the base assembly
(with controls and motor), the lid 
assembly, the protective screen, the
activated carbon pre-filter, the HEPA 
filter, and the CPZ

TM

sorbent media 

cartridge

Construction ...

For Best Performance ...

Replacement Filter s...

We recommend that you operate your Honeywell air cleaner 24 hours a day because
indoor air can be quickly contaminated by activity in a room, infiltration of outside air,
and generation by sources of contamination.

The Honeywell air cleaner is ready to begin cleaning air as soon as it is removed
from the carton, the protective bag on the CPZ

TM

sorbent media cartridge is removed,

and the unit is operated outdoors for a few minutes. See “Before Operating Your Air
Cleaner..”

For best performance the air outlet slot should not be blocked for at least

three feet in all directions.

Select the proper replacement filter for your Honeywell air cleaner from the 
chart below:

Replacement filters may be purchased from the retail store or ordered from the dealer
where you purchased the product. If you cannot locate one in your area, please call
our Consumer Relations Dept. at (800) 322-1110 and we will direct you to a stocking
dealer.

Model No.

61200
63200
64200

HEPA Filter

Part Number

28720
28600
29200

CPZ

TM

Cartridge

Part Number

36210
36200
36220

Carbon Pre-filter

Part Number

32002
34002
35002

Lid Assembly
and handle

CPZ

TM

Sorbent

Media Cartridge

Protective ‘Screen

Activated 
Carbon Pre-filter

HEPA 
Filter Cartridge

Assembly with 
Operating Controls

Summary of Contents for enviracaire 61200 Series









Reviews: