manualshive.com logo in svg

Honeywell Electrode Steam, Homeowner'S Manual, Page: 8 / 16

Share
Download
Honeywell Electrode Steam Homeowner'S Manual Download Page 8

Y

OUR NEW 

Electr

ode Steam

The Electrode Steam comes supplied with a HumidiPRO Digital Control (see below), or you can use your home 
thermostat (Prestige IAQ, VisionPro, or Lyric). You will use the humidity control to set the desired humidity level for 
your home, and to turn the Electrode Steam on and off.

HumidiPRO Digital Control

• 

Automatic humidification control with advanced 
window protection

• 

Optional manual humidification or dehumidification 
control

Your HVAC Professional Installer will install the Electrode Steam in a proper location in your home. The best 
location depends on your furnace type and configuration, and how your living space is arranged around the 
furnace ducts. Your Electrode Steam will be remote mounted.

Remote mounting. The Electrode Steam is installed 
some distance away from your furnace supply duct. 
An insulated hose carries steam from the Electrode 
Steam to a suitable location on the supply duct.

Remote mounting is required for the Electrode 
Humidifier. 

How is my Electrode Steam installed?

M35763

Steam Humidification System   33-00165—01

6

Which humidity control do I have? 

Summary of Contents for Electrode Steam

















Reviews:

No comments