EFY-045, EFY-047 SERIES, HY-047 AND HY-048 SERIES FAN OPERATION (CONT’D)
Oscillation and Ionizer Mode
The fan may be operated in Oscillation or Ionizer mode independently or may be
operated using both features simultaneously.
A. Press the Oscillation/Ionization button (
) once to activate oscillation
B. Press the Oscillation/Ionization button twice to activate ionization in addition to
oscillation
C. Press the Oscillation/Ionization button a third time to operate the ionizer and turn
the oscillation fan off
D. Press the Oscillation/Ionization button a fourth time to turn the ionizer off.
Breeze Mode
A.
Press the Breeze Mode button (
) once to operate Breeze Mode in the low breeze
setting. The low breeze mode operates in accordance with the chosen speed setting
of the fan as follows:
• High Fan Speed: Breeze Mode will alternate between the high and medium speed
settings
• Medium Fan Speed: Breeze Mode will alternate between the medium and low
speed settings
• Low Fan Speed: Breeze Mode will alternate between the low and off setting
B. Press the Breeze Mode button a second time to operate the fan in high Breeze
Mode. This will operate the fan in a random high/medium/low pattern regardless of
the speed setting.
C. Press the Breeze Mode button a third time to turn the Breeze Mode off.
°F to °C Display Change
This is done by simultaneously pressing and holding the Up and Down buttons (
)
for 2 seconds.
Note: The EFY-045, EFY-047, HY-047 and HY-048 Series are not air purifiers. These
fans are equipped with an ionizer feature which helps freshen the air with negative
ions creating a crisp, natural sensation. These units do not make any claims
regarding air cleaning or purification and should not be expected to perform as such.
If you have allergy or asthma symptoms that could be triggered by the presence of
an ionizer, an alternate product would be advisable.
The timer will set itself within 5 seconds of the last time the Up and Down buttons
are pressed. The timer icon will stop flashing. The current room temperature will once
again be displayed along with the chosen timer hour setting followed by “HR”. When
time runs out the fan will turn off.
C. Press the Mode button a third time to activate the combined Temperature/Timer
Mode. In this mode your fan will operate based on the temperature and timer settings
set previously in A and B. If you have not set one of your modes, you may press the
Temp/Timer Mode button a fourth time to start over and follow instructions A and B.
D. Press the Mode button a fourth time to disengage the Temperature/Timer modes
and return to the continuous run mode.
Note: When operating in either mode, the temperature or timer can be adjusted by
pressing the Up or Down buttons. The appropriate icon will blink for 5 seconds after
the last adjustment is made. When operating in the Temperature/Timer combination
mode, no changes can be made to the previous settings. To change the temperature
or timer settings for the combination mode, you must go back through the
temperature and timer set modes and then enter the combination mode.
