4. Using Telecommunication Function
46
ScanPal EDA50 Enterprise Hybrid Device User Guide
Telecommunication Function
The phone function of the terminal is realized with a speaker and a microphone.
The phone function also supports a Bluetooth headset or hands-free device.
The phone function is enabled by default.
This terminal supports the following network types:
•
GSM&EDGE: Band3/Band8/
•
WCDMA: Band1/Band8
For local network carriers, please contact Honeywell technical support.
When users enable the phone function and activate the service through wireless
carriers, they can customize the phone features and network settings in the
Mobile Network interface in Settings.
Note: WWAN version supports automatic system time setting with
network messages and timezone messages (NITZ).
Activating UMTS calls
UMTS calls can be activated by inserting Micro SIM card in the terminal. Micro
SIM card can be purchased from the network service provider.
1. Turn off the terminal.
2. Press down the battery cover safety button to move the lock to the unlock
position at right;
3. Open the battery cover with the battery cover buckle handle;
4. Pull out the battery (First open the battery connector side, then pull out the
battery)