manualshive.com logo in svg

Honeywell ECS Series, Installation And Operation Manual

Share
Download
Honeywell ECS Series Installation And Operation Manual Download Page 9

ECS Series Emergency Communication System Installation Manual                                  151455

1-2

1.2

Features

ECS-Series

•

Single enclosure for both Fire and Emergency Control System components.

•

On-board supervised microphone

•

Supports 25 Vrms or 70.7 Vrms speaker circuits using ECS-50W, ECS-INT50W or ECS-
DUAL50W. Supports 25 Vrms using ECS-125W.

•

Voice Control Module (VCM) and Network Voice Control Module (ECS-NVCM)
- IFP-2100ECS or IFP-300ECS have support for one ECS-NVCM.
- Built in Digital Message Repeater
- 15 ECS Messages

•

IFP-2000ECS, IFP-300ECS or IFP-2100ECS Systems have support for dual channel and backup 
audio using the ECS-DUAL50W amplifier and ECS-50WBU back-up amplifier.

•

SBUS Addressable Amplifier
- IFP-100ECS, IFP-300ECS or IFP-1000ECS Systems support a combination of up to eight ECS-
50W’s, ECS-125W’s or ECS-DUAL50W’s for a maximum of 1000 watts per system.
- IFP-2000ECS has support for up to 16 ECS-50W’s, ECS-125W’s or ECS-DUAL50W’s for a max-
imum of 2000 watts per system.
- IFP-2100ECS has support for up to 16 ECS-50W’s, ECS-125W’s, ECS-INT50W’s or ECS-
DUAL50W for a maximum of 2000 watts per system and up to 128 mappable speaker circuits.

•

Local Operator Console (LOC)
- IFP-100ECS, IFP-300ECS, IFP-1000ECS, or IFP-2000ECS Systems can support up to seven 
ECS-LOC's
- IFP-2100ECS Systems can support up to 15 ECS-LOC’s

•

Mappable Speaker Circuits
- IFP-100ECS, IFP-300ECS or IFP-1000ECS Systems can support up to 64 mappable speaker 
circuits using a combination of ECS-50W's, ECS-125W's, ECS-DUAL50W's and ECS-CE4's.
- IFP-2000ECS and IFP-2100ECS Systems can support up to 128 mappable speaker circuits 
using a combination of the ECS-50W, ECS-125W, ECS-DUAL50W, ECS-INT50W and ECS-CE4.

•

Backup Amplifier 
- ECS-DUAL50W's are capable of providing 50 watts of backed up audio power with the addition 
of the ECS-50WBU.

ECS-RVM

Remote Voice Module

IFP-100ECS, IFP-1000ECS,
IFP-2000ECS, IFP-300ECS, and 
IFP-2100ECS

ECS-LOC

Local Operating Console

IFP-100ECS, IFP-300ECS, IFP-
1000ECS, and IFP-2000ECS

ECS-LOC2100

Local Operating Console

 IFP-2100ECS

ECS-DUAL50W / ECS-
DUAL50WB**

Dual 50W Amplifier

IFP-100ECS, IFP-1000ECS,
IFP-2000ECS, IFP-300ECS, and IFP-
2100ECS 

ECS-50WBU

External Backup Amplifier

IFP-100ECS, IFP-1000ECS, IFP-
2000ECS, and IFP-300ECS 

ECS-INT50W

50 watt internal amplifier

IFP-100ECS, IFP-1000ECS,
IFP-2000ECS, IFP-300ECS and IFP-
2100ECS

*All references to ECS-50W within this manual are applicable to the ECS-50WB.

**All references to ECS-DUAL50W within this manual are applicable to ECS-DUAL50WB.

Model Number

Description

Compatible With

Summary of Contents for ECS Series



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands