manualshive.com logo in svg

Honeywell DS05, Manual, Page: 8 / 8

Share
Download
Honeywell DS05 Manual Download Page 8

DS05 DIAL SET PRESSURE REGULATING VALVE

62-3041—2

8

Helping You Control Your World

Home and Building Control
Honeywell Limited-Honeywell Limitée
155 Gordon Baker Road
North York, Ontario
M2H 2C9

62-3041—2     Rev. 2-96     Printed in U.S.A.

Honeywell Braukmann
Honeywell Inc.
1985 Douglas Drive North
Golden Valley, MN 55422

Printed on recycled paper containing at 
least 10% post-consumer paper fibers.

DS05 Parts and Accessories

Order Number

Description

Replacement Parts
272838

Bonnet for 1/2 in. and 3/4 in. DS05.

272839

Bonnet for 1 in. and 1-1/4 in. DS05.

272840

Gasket for 1/2 in. D05/DS05 (quantity 24).

272841

Gasket for 3/4 in. D05/DS05 (quantity 24).

272842

Gasket for 1 in. D05/DS05 (quantity 24).

272843

Gasket for 1-1/4 in. D05/DS05 (quantity 24).

K05A1009

Replacement Cartridge, Screen and O-ring for 1/2 and 3/4 in. Valves.

K05A1017

Replacement Cartridge, Screen and O-ring for 1 and 1-1/4 in. Valves.

K05B1007

Replacement Screen and O-ring for 1/2 and 3/4 in. Valves.

K05B1015

Replacement Screen and O-ring for 1 and 1-1/4 in. Valves.

Union Kits
K06U1069

Union Kit—1/2 in., includes Nut, Female NPT Threaded Tailpiece and Gasket.

K06U1077

Union Kit—3/4 in., includes Nut, Female NPT Threaded Tailpiece and Gasket.

K06U1085

Union Kit—1 in., includes Nut, Female NPT Threaded Tailpiece and Gasket.

K06U1135

Union Kit—1-1/4 in. for D05/D505, includes Nut, Female NPT Threaded Tailpiece and Gasket.

K06U1093

Union Kit—1/2 in., includes Nut, Sweat Tailpiece and Gasket.

K06U1101

Union Kit—3/4 in., includes Nut, Sweat Tailpiece and Gasket.

K06U1119

Union Kit—1 in., includes Nut, Sweat Tailpiece and Gasket.

K06U1143

Union Kit—1-1/4 in. for D05/DS05, includes Nut, Sweat Tailpiece and Gasket.

Accessories
202868

Filter Washer, 3/4 in., for use with U06P1045 Plastic Stand-in Pipe.

202869

Filter Washer, 1 in., for use with U06P1052 Plastic Stand-in Pipe.

U06P1045

Plastic Stand-in Pipe (spacer) for use with DS05 Double Union Pressure Regulating Valves, 3/4 in.

U06P1052

Plastic Stand-in Pipe (spacer) for use with DS05 Double Union Pressure Regulating Valves, 1 in.

Pressure Gauges
M39A1032

Pressure Gauge with Bottom Inlet; 0 to 160 psi.

MT194A1006

Water Pressure Test and Recording Gauge with Hose Bib Connection; 0 to 300 psi.

Service Tool
MT06A1022

Service Tool for 1/2 in. and 3/4 in. DS05.

MT06A1009

Service Tool for 1 in. and 1-1/4 in. DS05.

www.sparco-inc.com

www.honeywell.ca/braukmann/

Summary of Contents for DS05









Reviews:

No comments