Honeywell Domonial cai, Quick Install Manual

Page: 12 / 76

4.3 Setting the Date and Time
From the main menu, select 4-DATE & TIME.
Trigger a registration message by pressing the tamper or the relevant
buttons on the device.
The serial number, type and radio level appear on the TCU screen.
Press OK to display the Modify Device screen.
Select from the list and press
OK
or press to return to the main menu
Use the Code Reference document to find the address and possible value of
the parameters.
4.2 General Parameters
SET PARAMETER
--------------------
TYPE ...G...................
VALUE .......................
CANCEL ( ) VAL (OK)
Select 3-PARAMETERS to change the general system parameter (e.g. entry and exit delays).
Use the Code Reference document to find the addresses and possible values for the parameters.
1-REGISTER
2-DEVICES
3-PARAMETERS
4-DATE & TIME
5-SYSTEM DIAG.
6-TRANSM.STATUS
7-RADIO SCAN
8-ABORT
9-SAVE+QUIT
VIEW DEVICE
-----------------
LBL “XDevice Lbl”
TYPE “XX” “CH” “YY”
RF “x”/10…………..
FAULTS B T O S ..…
EDIT (OK)
SELECT ADDRESS
------------------------
LABEL “XDevice Lbl”
TYPE “YY”
ADDRESS
CANCEL ( ) VAL (OK)
MODIFY DEVICE
--------------------
1. LABEL
2. EDIT
3. DELETE
4. CHANNEL
EDIT (OK)
SELECT ADDRESS
------------------------
TYPE ...G...................
ADDRESS..................
NO ( ) YES (OK)
SET PARAMETER
--------------------
LBL X Device Lbl.....
TYPE “YY”................
ADDRESS ................
CANCEL ( ) VAL (OK)
12
English Programming