manualshive.com logo in svg

Honeywell Dolphin Power Tools, User Manual

Share
Download
Honeywell Dolphin Power Tools User Manual Download Page 171

12 - 1

12

Print Power Tools

Overview

Dolphin terminals contain two print utilities:

BTPrint.exe

BTPrint prints to a Bluetooth device via the Bluetooth wireless radio; see page 

12-1

.

The EXE is located in the \Program Files\Power Tools folder.

Print Demo

All Dolphin terminals contain a Print Demo (

Start

 > 

Demos

 > 

Print

 

Demo

) that prints a sample receipt or 

bar code to a Bluetooth printer. The Print Demo calls the BTPrint.exe when printing to a Bluetooth device. 

For more information about the Print Demo, please refer to the Print Demo chapter of the Demos User’s 
Guide, which is available on the User CD or from the web site: 

www.honeywellaidc.com

.

Note: You can also call the EXE to print to a Bluetooth printer via the command line.

BTPrint

BTPrint allows you to print to a Bluetooth printer via the command line, provided that the Bluetooth printer 
is set up as a Bluetooth Favorite on the Dolphin terminal. 

For more information about setting up Bluetooth Favorite devices, please see the Bluetooth section of the 
Print Demo chapter in the Demos User’s Guide, which is available on the User CD or from the Partners 
area of 

www.honeywellaidc.com

.

Calling a Bluetooth Printer

Call BTPrint.exe from the command line – 

\Program Files\Power Tools\BTPrint.exe

 – with the 

path of the document as the command line argument.

Summary of Contents for Dolphin Power Tools

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands