3
USE & OPERATION (CONTINUED)
EN
FUNCTION BUTTONS
COOL
You must add water before operating the unit in Cool mode. Press the
button until
is illuminated on the display screen. The water pump will operate and you will feel the cooler air after
the Honeycomb Cooling Media is completely wet.
: In running status, press the button until is lluminated. The TIMER function allows
you to program the unit for up to 15 hours of use.
: In standby status, press the button until is lluminated. The PRESET function
allows you to program the unit for up to 15 hours. When the preset time has been
reached, the unit will automatically turn on. The fan speed will start at Ultra Low speed
and after two hours the unit will automatically turn off.
TIMER
/ PRESET
TIMER
PRESET
POWER
Press the button to turn the unit on. The cooler will start automatically at Normal mode. The
LED control panel will be illuminated and will turn off after 1 second. Thereafter the unit will turn to
Standby status. In Standby status the unit can be turned on by pressing the power button, and will run
automatically at Ultra Low speed. To turn the unit off, press the power button again.
SLEEP / WIND TYPE
Press the button to select your desired wind type: Natural - Sleep - Normal.
SPEED
Press the
button repeatedly to change the speed between Ultra Low, Low, Medium or High.
The indicator light will show the selected speed:
Medium (3)
High (4)
Low (2)
Ultra Low (1)
SWING
Press the
button until
is illuminated on the display screen. The louvers
will begin to move left to right automatically. You can manually adjust the louvers
to change vertical air flow.
Louver
Movement
NATURAL
SLEEP
NORMAL
: The fan speed alternates between Ultra Low, Low, Medium only.
: When SLEEP mode is selected the fan will begin at Low Speed. After 1 hour the speed
setting will automatically switch to Ultra Low speed. This setting will maintain until
you have turned off the air cooler.
: You can select either Ultra Low, Low, Medium or High fan speeds.
