8
‘
Getting Started’
SETTING-UP THE CM737
‘
Efficient Daily Use’
PROGRAMMING THE CM737
This section shows you how to setup and run the CM737 in 2 simple steps:
STEP 1: Setting the Time
To set the Time:
a.
Press either of the
or buttons once to enter time setting mode. The LCD screen flashes
the time digits (when the unit is powered for the first time the display shows 12:00).
b.
Use the
or buttons to set the correct time then press the green
button to confirm.
Each press of the buttons will change the time by one minute and holding them down will change
the time slowly at first and get progressively quicker.
Note:
If this mode is entered accidentally then press the
AUTO
,
MAN
or
OFF
buttons to exit.
STEP 2: Running the Built-in Heating Program
The CM737 is now ready for operation. Press the
AUTO
button and the built-in heating program will
start running.
Note:
The built-in heating program has been designed to provide normal comfort
requirements, but if you want to customise the settings please see the next section ‘
Programming
the CM737
’.
The Built-in Heating Program
The built-in heating program has 4 temperature level changes per day that can be set between
3.00am and 2.50am the following day - allowing you to maintain the evening temperature after
midnight. Each temperature level can be set between 5°C and 35°C, and adjusted in 0.5°C
increments. The factory default program for heating is as follows.
Monday to Friday
(Day 1 to 5)
Period
1
2
3
4
Time
6:30
8:00
18:00
22:30
Temperature
21°C
18°C
21°C
16°C
Saturday & Sunday
(Day 6 & 7)
Period
1
2
3
4
Time
8:00
10:00
18:00
23:00
Temperature
21°C
21°C
21°C
16°C
ENG