I am going on holiday for a few days. How do I
save energy but ensure that the house is warm
when I return?
1. Move the slider to the operating position you require on returning from
holiday (
AUTO or MAN)
2. Press
(HOLIDAY) to display the holiday days counter and
temperature.
3. Press
+ or - to set the holiday time (1 - 99 days). An extra flashing
day marker shows you the holiday return day.
4. Press
TEMP
or
to set the holiday temperature (5°C - 30°C).
The unit will control to the new temperature for the set number of days
holiday. At midnight the holiday counter will be reduced by one until the
selected number of days have passed. The unit will then return to normal
control as set by the
MAN or AUTO position.
To cancel the
HOLIDAY setting, press
a second time.
How can I switch the CM67 off?
Move the slider to
OFF. The unit has an intelligent built-in frost protection
feature, so that if the temperature falls below 5°C, it will automatically
switch the heating on.
How do change the batteries?
With no other accessories fitted and for applications other than electric
heating, the batteries should last about 4 years.
When the batteries need replacing, a flashing
symbol will be
displayed.
To change the batteries:
1. Lift up the front flap to reveal the battery compartment. Open the
battery compartment by inserting a coin underneath the bottom right
edge of the flap and lift out.
2. Replace the used batteries with 2 new AA LR6 Alkaline Batteries and
push the battery compartment firmly back into the front of the unit.
RESPECT YOUR ENVIRONMENT!
Take care to dispose of used batteries carefully.
NOTE: If you take more than one minute to change the batteries the clock
may need to be reset - see
How do I adjust the time?
What does 'SERVICE' on the display of my CM67
mean (optional)?
NOTE: This option only works if activated by your installer.
The '
SERVICE' indicator is displayed at set intervals as a reminder that
your heating system requires a routine check. Please call your installer
to arrange a maintenance visit.
The symbol will remain on the display of the CM67 until it is either reset
or disabled by your installer. The CM67 and heating system will continue
to operate as normal.
Can I change the programmed temperature for a
short time?
When the slider is in
AUTO, the temperature can be adjusted temporarily
by pressing
TEMP
or
. The temperature will return to the program
at the next temperature change time.
How do I check the programmed temperature?
In normal operation the temperature displayed is the actual room
temperature. To check the programmed temperature press and the
display will show the programmed temperature with the two small
arrows.
How do I set one temperature for the whole day?
To operate as a simple thermostat with one temperature throughout the
day, move the slider to
MAN. Adjust the manual temperature by pressing
TEMP or . The manual temperature can be set anywhere from 5°C
to 30°C in 0.5°C steps.
I am having some friends round for tea/coffee.
How can I extend my heating program for a few
hours?
When the slider is in
AUTO, the temperature can be adjusted temporarily
by pressing the
(PARTY) button. Set the party time (1 - 23 hours) by
pressing
+ or - . Set the party temperature (5°C - 30°C) by pressing
TEMP or . The CM67 will control to the new temperature for the set
number of hours and then go back to the normal temperature program.
To cancel the
PARTY setting, press
a second time.
The
button
can also be used when you go out and want to reduce
the temperature for a few hours to save energy.
I have a day off work tomorrow and I am staying
at home, do I have to re-program the CM67?
No, with one button press, the CM67 will remember that tomorrow is a
day off. Tomorrow, the CM67 will control the temperature using Sunday’s
program.
When the slider is in
AUTO, press
(DAY OFF). A
symbol will
appear and the day marker for tomorrow will flash. This indicates that the
Sunday temperature program will be followed tomorrow. Tomorrow the
symbol will still appear but without the flashing day marker. The CM67 will
controll tomorrow’s temperatures using Sunday’s program.
To cancel tomorrow’s DAY OFF, press
twice.
If you have 2 or more days off, press
each night before going to bed.
If you have a DAY OFF today and want to control the temperature using
Sunday’s program press
twice. To cancel any DAY OFF setting, press
repeatedly until the
symbol disappears.
CM67 Display Backlight
The CM67 has a backlit display that will illuminate when a button is
pressed or the slider is moved for easier viewing of the display in low
light conditions. After the last button press or slider movement the backlight
will remain on for 7 seconds.
How do I set the date and time?
Move the CM67 setting slider to the
DATE/ position. When you set
the date and time for the first time after the batteries are inserted, the
display will show:
Press the
+ or - buttons to set the current year
(e.g. 04 = 2004)
Press the
TEMP
button to set the month:
Press the
+ or - buttons to set the current
month (e.g. 01 = January)
Press the
TEMP
button to set the day of the month.
Press the
+ or - buttons to set the current day
of the month.
Check if the day marker on the display indicates the
correct day of the week (e.g. 4 = Thursday)
Press
TEMP
button to set the time.
Press the
+ or - buttons until the correct time
is displayed. Each press of
+ or - button will
change the time by one minute. Holding the
button for a few seconds will change the time
slowly then quickly.
Mon Tue Wed Thu Fri
Sat Sun
Day of the week
indicator
CM67 Controls/Display Layout
The diagram below details the key button functions and display information.
Monday to Friday
Program
1
2
3
4
5
6
Time
6:30
8:00
12:00
2:00
6:00
10:30
Temperature 21°C
18°C
21°C
18°C
21°C
16°C
Saturday to Sunday
Program
1
2
3
4
5
6
Time
8:00
10:00
12:00
2:00
6:00
11:00
Temperature 21°C
21°C
21°C
21°C
21°C
16°C
Battery Low
Indicator
Day Marker
Time Display
Burner on
Indicator
Temperature
Change Buttons
=
increase
=
decrease
Information
Enquiry
Button
Temperature
Display
Holiday Button
Day Off Button
Party Button
Battery
Compartment
Day But-
ton
Copy Day
Button
Time
Change
Buttons
Setting
Slider
Program Buttons
TEMP
DATE
/
PROG
AUTO
MAN
OFF
Mon
Tue
Wed
Thu
Fri
Sat
Sun
1
2
3
4
5
6
PROG
COPY
DAY
DAY 1...7
How do I get started with the factory default
temperature program?
Move the slider to
AUTO. The CM67 will now control your heating using
the built-in temperature program:-
How do I set my own temperature program for
each day of the week?
1. Move the slider to
PROG. The first temperature change time and
setpoint for Monday will flash to indicate that they can be changed
(the two small arrows are displayed only when the programmed
temperature level is shown).
2. Press
+ or - to adjust the first temperature change time. Holding
the button down will change the time quickly. The change time can be
set in 10 minute steps from 03:00 in the morning. The change time
can be adjusted up to 02:50 on the next morning, so you can maintain
the evening temperature after midnight.
(Note: If you attempt to move a change time past the next change
time, both times will be moved).
3. Press the
TEMP or to adjust the first temperature level. Holding
the button down will change the temperature quickly. The temperature
can be set in 0.5°C steps from 5°C to 30°C.
4. Press
PROG 2 to display the second temperature level and time
levels for Monday. Use
+ or - and TEMP
or
to change the
time and temperature.
5. The remaining temperature changes for Monday can be displayed by
pressing
PROG buttons 3, 4, 5 and 6 and adjusted by using + or
- and TEMP
or
. (If you don’t want to use all the temperature
change times 2, 3, 4, 5 or 6, refer to the section “What if I don’t want
to use all 6 temperature change times?”).
You now have a choice to set the program for the next day:-
6a. Press
COPY DAY to copy Monday’s program into Tuesday. To set several
days of the week to the same program, press
COPY DAY repeatedly.
6b. Press
DAY 1..7 to move the day marker to Tuesday (Day 2). The
program for Tuesday can then be set as described in steps 2 to 5.
Programs for Wednesday (Day 3) to Sunday (Day 7) can be set in
the same way, using
DAY 1..7.
7. Move the slider to
AUTO when you have completed steps 6a or 6b,
The CM67 will now control the room temperature at the times and
temperatures you have set.
What if I don’t want to use all 6 temperature
change times?
Although the CM67 has up to 6
temperature / time changes available
per day (
PROG 1 – 6), any unused
settings may be deleted by holding
down the appropriate button (
PROG
2 – 6) for 2 seconds.
To reinstate any deleted setting hold down the button again for 2
seconds.
DATE
/
PROG
AUTO
MAN
OFF
1
2
3
4
5
6
Mon Tue Wed Thu Fri Sat Sun
DATE
/
PROG
AUTO
MAN
OFF
Display Today
Display Tomorrow
Mon Tue Wed Thu Fri Sat Sun
SERVICE
How do I adjust the time?
If you want to adjust the time at any time during normal use of the
CM67 move the setting slider to
DATE/ position then use + or -
button to adjust the time.
NOTE: To access the year, month and day setting
press
TEMP
or
buttons.
Will my clock automatically adjust for Summer/
Winter?
The CM67 has a built-in
Automatic Summer/Winter Time Change
feature that will automatically adjust the clock forward or backward by
one hour for ‘Daylight Saving Time’. This is carried out on the last Sunday
of March and October each year.
If not required this may be disabled by moving the slider to
OFF position
and pressing the
+, - and INFO buttons together.
Press the
TEMP
button (18:tC 0) to disable or the TEMP
(18:tC 1) to enable.
Mover the slider to
AUTO to resume normal operation.
1
2
3
4
5
6
